An igniter that clicks all night, a coil that glows on one side only, a glass top with a fresh crack: these are the calls we take every day. One call connects you with a licensed, insured independent cooktop pro around Madison.
We do not send just anyone with a toolbox. The pros in our network work on cooktops week in and week out, and they know the difference between a bad spark module and a wet burner head.
Every contractor we connect you with runs their own licensed, insured business. Gas work on a range touches a supply line, so ask the pro about their gas certification for your area before work starts.
You see the number before a screwdriver turns. The pro gives you a written, upfront quote after the diagnosis, and the choice to proceed is yours.
Our dispatchers look for the nearest pro with an opening around Madison. Same-day visits are common when a local technician has room on the schedule, and we tell you the arrival window on the call.
Expect a manometer, a digital multimeter, an orifice set, and tech sheets for slide-in, freestanding and pro-style ranges. The right tools mean the first visit is usually the one that gets the burner going again.
We hear from people with forty-year-old coil ranges and from people with brand-new induction cooktops. Different machines, same goal: get the burners working and safe again, without paying for guesswork.
Tell the dispatcher the brand, whether it runs on natural gas, propane or electricity, and exactly which burner misbehaves. That short description helps the pro bring the right igniter, element or valve on the first trip.
These are the cooktop faults that fill our phone log. If yours is not listed, call anyway; the dispatcher will match you with a pro who knows that model.
A burner that clicks and clicks after it lights, or one that never sparks at all, usually points to a wet or cracked igniter, a stuck valve switch, or a failing spark module. The tech checks each electrode gap and listens for which burner the module is firing.
A healthy flame is crisp and blue. Yellow tips, lazy flames or flames that lift off the ports point to clogged burner ports, a misaligned burner cap, a dirty orifice or a regulator problem. The pro clears the ports, reseats the cap and head, and checks pressure with a manometer.
A coil that only heats on high, or never heats at all, gets tested with a multimeter at the element, the burner block and the infinite switch. Burnt receptacles are common on older ranges and are a fire risk worth fixing right away.
A crack in a smooth-top is more than cosmetic: spills can reach live elements underneath. The tech tests the radiant element and limiter, checks the hot-surface indicator, and quotes a new glass top if the old one is damaged.
Blinking codes, a zone that will not detect the pan, or a cooktop that shuts down mid-boil are classic induction calls. The technician checks the cooling fan, generator board and coil connections with the service manual open.
A knob that spins without turning the valve, a valve stem that sticks, or a move from natural gas to propane all land in this group. The tech can swap orifices for the new fuel, adjust the regulator, and fit an anti-tip bracket on slide-in and freestanding units.
Bring these notes to the phone call. The pro confirms the cause with real tests before quoting a part.
| Symptom | Common cause | What the tech checks |
|---|---|---|
| Clicking that will not stop | Wet or shorted valve switch, cracked igniter | Switch continuity, harness, igniter gap |
| No spark on any burner | Spark module or power supply | Module output and incoming voltage |
| Yellow or lifting flame | Clogged ports, wrong orifice, pressure off | Ports, cap seating, manometer reading |
| Coil only heats on high | Failed infinite switch | Switch cycling with a multimeter |
| Smooth-top zone stays cold | Radiant element or limiter open | Element and limiter resistance |
| Induction error code | Cookware, fan or power board | Code lookup, fan, board voltages |
No forms, no waiting for an email. Here is what happens after you dial our dispatch line.
Call +1-855-636-0185 and describe the burner, the fuel type and the brand. The dispatcher checks which independent stove pros near Madison have openings.
A local pro heads your way with cooktop parts on board. The dispatcher tells you the arrival window before you hang up.
After testing, you get a plain explanation and a written quote from the technician. You decide whether the fix makes sense for your range.
Once the part is in, the technician lights or powers every burner, checks flame or heat on each setting, and leak-tests any gas fitting that was opened.
A careful pro pulls the cooktop or lifts the top before guessing. On gas units they check pressure at the manifold; on electric units they read voltage at the switch and resistance at the element. That is how a cheap igniter does not turn into an expensive control board by mistake.
Our dispatch line is answered day and night.
The igniter on our gas range would not quit clicking after a boil-over. The pro pulled the knobs, traced it to one wet switch under the panel, replaced it and tested every burner before he left.
A tenant called me about a coil burner that sparked when it was plugged in. The pro found the burner block had cooked itself, swapped the block and the element, and explained why both had to go together.
The induction top flashed a code every time I boiled water. The pro ruled out my cookware, then found a seized cooling fan under the glass. Simple fix once someone actually opened it up.
Our range needed an LP conversion after the move. The technician changed the orifices and regulator setting, then mounted the anti-tip bracket. The flames are blue and steady now.
Nonstop clicking usually means moisture or grease has reached a valve switch or igniter, so the spark module thinks a burner is still asking for a spark. Sometimes drying it out helps, but a shorted switch needs replacing.
A yellow or orange flame means incomplete combustion, which can create soot and carbon monoxide. Common causes are clogged ports, a cap that sits crooked, or the wrong orifice for your fuel. Stop using that burner and have a pro check it.
Cut the power or the gas first. On electric ranges, flip the breaker; on gas ranges, close the shutoff behind the unit. Then call and we will route a pro who can replace the switch or valve that failed.
A crack lets liquid reach live parts, so the glass has to be replaced. The technician quotes the new top in writing, and most models allow the glass to be swapped without replacing the whole range.
Most gas ranges and cooktops can be converted with an LP kit from the manufacturer. The pro swaps the burner orifices, adjusts the pressure regulator, and checks every flame afterward.
Start with a magnet test on the pan. Aluminum, copper and some stainless pans will not work on induction. If the cookware checks out, a pro can read the error code and test the generator board and fan.
Our referral line covers homes, condos, apartments and rental properties in Madison and the nearby neighborhoods and suburbs. The independent pros we connect you with drive to you, and most carry common igniters, coil elements and switches on the truck.
If you manage rentals, mention the unit and the tenant contact when you call. The dispatcher passes it to the pro so the visit goes smoothly.
Gas, electric or induction: call and we will find a pro near you.
